***********************************************************
           Roland CutStudio Plugin for CorelDRAW
***********************************************************

WELCOME TO Roland CutStudio Plugin for CorelDRAW!

We recommend that you read through this document first to get a better understanding of Roland CutStudio Plugin for CorelDRAW. This "Readme" file provides some important information about installing and setting up this program.

The explanations here assume that you are already familiar with using in Windows.  For further information about using Windows, please refer the user's manual from Microsoft Corp.

If you are reading this file with Notepad, then at the Edit menu click "WordWrap" to select it and make the displayed file easier to read.


Table of Contents

1.  Summary 
2.  Compatible Versions
3.  Installation
4.  What to Do After Installing


* Windows(R) is registered trademark or trademark of Microsoft(R) Corporation in the United States and/or other countries.
* Corel and CorelDRAW are registered trademarks or trademarks of Corel Corporation or Corel Corporation Limited.
Other company and product names appearing herein are trademarks or registered trademarks of their respective holders.

Copyright (C) 2005 Roland DG Corporation


========================================================
1.  Summary 
========================================================

Roland CutStudio Plugin for CorelDRAW is a software plug-in for the CorelDRAW program from Corel Corporation.
This plug-in outputs the cutting line data drawn with CorelDRAW to Roland CutStudio.


========================================================
2.  Compatible Versions
========================================================

This plug-in works with CorelDRAW version 10, 11 and 12.


========================================================
3.  Installation
========================================================

* When installing and setting up under Windows 2000/XP, log on to Windows as a member of the [Administrators] group.


- Installing the program from CD-ROM

Follow the instructions on the setup menu on the CD-ROM to install and set up.


- When downloading from the Roland DG Corp. website

Expanding the downloaded file creates the following files in the folder where expanded.

	CutStudioPlugIn.gms	Software plug-in
	CutStudioPlugIn.bmp	Icon image for the plug-in
	Readmej.txt		This file

Copy CutStudioPlugIn.gms and CutStudioPlugIn.bmp to the following folders.

	CorelDRAW 10: [Program Files]-[Corel]-[Graphics10]-[Draw]-[GMS]
	CorelDRAW 11: [Program Files]-[Corel]-[Corel Graphics 11]-[Draw]-[GMS]
	CorelDRAW 12: [Program Files]-[Corel]-[Corel Graphics 12]-[Draw]-[GMS]


========================================================
4.  What to Do After Installing
========================================================

To use this plug-in, carry out the following operations after installing.

	- Install VBA (CorelDRAW 10 only).
	- Add the start button to the toolbar.
	- Change the start button icon.

Carry out these operations according to the procedure described below.


*****************************************
   Install VBA (CorelDRAW 10 only).
*****************************************

* If you're using CorelDRAW 11 or 12, VBA is also installed when you install and set up CorelDRAW.
  Skip this step, and continue from "Add the start button to the toolbar."

1. Insert the CorelDRAW 10 DISK1 CD-ROM into the CD-ROM drive.

2. If the installer starts, close it.

3. Windows XP
   On the task bar, click Start, and then click My Computer.
   Windows 98/Me/2000
   Double-click the My Computer icon on the desktop.

4. Right-click the CD-ROM icon, and then click Open.

5. Double-click vba6.msi in the Corel\Graphics10\Config\Redist\VBA6 folder on the CD-ROM.
   VBA is installed.

5. When the final window appears, click OK.
   If a message appears prompting you to restart, click the Yes button to restart your computer.

[ Note ]
- The VBA function may be removed when CorelDRAW 10 is reinstalled.
Be sure to follow these procedures and reinstall the VBA function also.
- If the VBA function is already installed, the final window opens when vba6.msi is double-clicked.
Click OK to close the window.


********************************************
   Add the start button to the toolbar.
********************************************

1. Start CorelDRAW and open a new document.

2. From the Tools menu, click Customization.
   The Options window opens.

3. Click Customization, and then click Commands from the submenu.

4. From the Commands pull-down menu, choose Macros.
   The macro information is displayed.

5. From the macro list, select CutStudioPlugIn.ExecuteCutStudio.CutStudio, and drag and drop it on the toolbar.
   If the macro is dragged and dropped on a location other than the existing toolbar, a toolbar for Roland CutStudio CorelDRAW Plug-in is created.

6. Click OK to close the Options window.
   Close CorelDRAW.

The next time CorelDRAW is started, the start button appears at the location you specified.


**************************************
   Change the start button icon.
**************************************

1. Carry out steps 1 to 4 described in "Add the start button to the toolbar", and then select Macros on the Options window.

2. Select CutStudioPlugIn.ExecuteCutStudio.CutStudio, and then click the Appearance tab.

3. Click the Import button.

4. From the icon list, click the Files button.

5. From the GMS folder in the folder where CorelDRAW is installed, select the CutStudioPlugIn.bmp file, and then click the Open button.
	CorelDRAW 10: [Program Files]-[Corel]-[Graphics10]-[Draw]-[GMS]
	CorelDRAW 11: [Program Files]-[Corel]-[Corel Graphics 11]-[Draw]-[GMS]
	CorelDRAW 12: [Program Files]-[Corel]-[Corel Graphics 12]-[Draw]-[GMS]

6. Click OK to close the Options dialog box.
   The start button icon is changed to the specified icon.


========================================================

If you have further questions or problem, please contact to your local vendor or Roland sales center.

