scan_n_cut [Maakplek]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

=======How to Brother Scan 'n Cut=======

                       It can scan, it can cut, it can even brother!
{{ ::whatsapp_image_2022-10-26_at_11.34.15.jpeg?400 |}}
                       This machine was gifted/lent by Mariette <3
 
=====What materials can it cut?=====
  * paper
  * fabric
  * vinyl
  * stickerspaper
  * tatoopaper
  * plastic sheet

=====What knife do you use for what?=====
Knives dull pretty quickly, depending on the material you cut. I think there is one knife for normal use, if you want to cut more exiting materials, it's nice if you buy your own knife.

=====Instructions=====
For more elaborate instructions watch some youtube tutorials!

  * Stick you material to the sticky sheet
  * Load the sheet by pressing the middle button that looks like its loading a raster (insert pic)
  * Load your svg from a USB stick, laptop or other data connection
  * Scan you sheet, so the machine knows where the material is
  * Select where you want to cut
  * Check your settings, for the cutting pressure, auto is a good setting. Make sure you select cut or half-cut
  * Start!
  * Make sure your material doesn't move during the cutting process, you can pause your cut anytime by pressing the pause button.
  * Unload the sheet by pressing the middle button that looks like its loading a raster (insert pic)

=====How to use the pen plotter?=====
Idk yet

User Tools

Site Tools

Page Tools