Differences

This shows you the differences between two versions of the page.

--- cpm4030 [2025/08/28 11:08] – wrusman
+++ cpm4030 [2026/06/25 11:38] (current) – wrusman
@@ Line 7: / Line 7: @@
 De besturing en bijgeleverde software waren wat beperkt en verouderd, dus is hij omgebouwd naar FluidNC (grbl variant voor ESP32). http://wiki.fluidnc.com/
-===== CAM en Sender instellingen =====
+====== Freesjes ======
-x: 380mm max  4000mm/min \\
-y: 300mm max  4000mm/min \\
-z: 200mm max  4000mm/min \\
+^  ^ Type ^ diameter  ^ Lengte ^ snijlengte ^ Doel ^ Link voor als hij stuk gaat  ^
+|{{:profiler:v-cutter.jpg?200|}}| 90 graden V-cutter | 6mm | 50mm| tip | Graveren / V-Carve | [[https://www.amazon.nl/gp/product/B07RZ4HS2J/ref=ppx_yo_dt_b_asin_title_o06_s00 | link]]|
+|{{:profiler:1snijder.jpg?200|}}| Frees 1-snijder | 4mm | 45mm | 22mm| uitfrezen van objecten of pockets | [[https://www.amazon.nl/dp/B07RHH5B5V?ref=ppx_yo2ov_dt_b_product_details | link]]|
+|{{:profiler:pcbfrees.jpg?200|}}| Frees 2-snijder | 0,6mm | ?mm | ?mm| Printplaten of fijn gaveerwerk | [[https://www.amazon.nl/dp/B09DCLQ5NL?ref=ppx_yo2ov_dt_b_product_details | link]]|
-===== Macro's =====
+=== Speeds en Feeds ===
-=== "Home All"  ===
+De spindel draait op 10000RPM, dat bepaalt de maximum en optimale snelheden.
-<code>
+Dit zijn richtlijnen, probeer het eerst met een stukje proefmateriaal
-$HZ ;$HX;G10 P0 L20 X0;$HY; G10 P0 L20 Y0;
-</code>
-=== "Probe Z" voor gebruik met de toolsetter (kan nog beter)===
+**Aluminium 6061**
-<code>
+^Tool ^feed per tand ^feedrate mm/min ^stepover ^note^
-g90;g21;g38.2 z-70 f100;G92 z65;g1 z67;g38.2 z-10 f50;G92 z65;g0 z75;
+|1 mm 2fl |0.006 |120 |0.10 |ramp, don't plunge|
-</code>
+|2 mm 2fl |0.012 |240 |0.30 | |
+|3 mm 2fl |0.020 |400 |0.50 | |
+|4 mm 1fl |0.045 |450 |0.6–1.0|preferred — chip clearance|
+|6 mm 2fl |0.035 |700 |adaptive| Vc 189 high but Al tolerates it|
-=== "Probe Z" voor gebruik met de toolsetter v2 (kan nog beter?)===
+**Koper**
-<code>
+^Tool ^feed per tand ^feedrate mm/min ^stepover ^note^
-G21			; metric units
+|2 mm 2fl |0.010 |200 |0.30 | |
-G91                  	; Relative Positioning
+|3 mm 2fl |0.016 |320 |0.30 | |
-G38.2 Z-70 F100		; probe down with maximum 70mm and speed 100 mm/min
+|4 mm 1fl |0.035 |350 |0.30 |preferred — chip clearance|
-G10 L20 P1 Z65		; set G54 Z to 65mm at contact
+|6 mm 2fl |0.028 |560 |0.30 |Vc 189 = edge-buildup risk, watch it|
-G0 Z5			; retract 5mm
-G38.2 Z-10 F50		; probe down with maximum 10mm and speed 50 mm/min
-G10 L20 P1 Z65.3	; set G54 Z to 65mm at contact
-G0 Z5			; retract 5mm
-G90			; back to absolute
-</code>
-=== "Ga naar positie x10 y10"===
+**Brons**
-<code>
+^Tool ^feed per tand ^feedrate mm/min ^stepover ^
-G90 G21; (Absolute position in mm.)
+|2 mm 2fl |0.012 |240 |0.5×D|
-G0 X10 Y10;
+|3 mm 2fl |0.020 |400 |0.5–0,9×D|
-</code>
+|4 mm 2fl |0.025 |500 |0.5–0,9×D|
+|6 mm 2fl |0.030 |600 |adaptive for full depth|
+**Plastics**
+^Tool ^feed per tand ^feedrate mm/min ^stepover ^
+|2 mm 2fl |0.05 |1000 |up to 0,9×D|
+|3 mm 2fl |0.07 |1400 |0,9×D|
+|4 mm 1fl |0.10 |1000 |0,9×D preferred — chip clearance|
+|6 mm 2fl |0.10 |2000 |0,9×D|
+**Hout**
+^Tool ^feed per tand ^feedrate mm/min ^stepover ^
+|3 mm 2fl |0.10 |2000 |0,9×D|
+|4 mm 1fl |0.20 |2000 |0,9×D preferred — chip clearance|
+|6 mm 2fl |0.15 |3000 |0,9×D|
 ===== Software =====
-=== GCode Creeren / CAM ===
+=== CAM en Sender instellingen ===
-toptool : [[https://grid.space/kiri/|Kiri:Moto]] browser based CAM \\
+x: 380mm max  4000mm/min \\
-Settings : {{ :profiler:kiri-moto.zip |}}
+y: 300mm max  4000mm/min \\
+z: 200mm max  4000mm/min \\
+====== GCode Creeren / CAM ======
+toptool : [[https://grid.space/kiri/|Kiri:Moto]] browser based CAM &  {{ :profiler:kiri-moto.zip |presets}}
 van de makers van lightburn : [[https://docs.millmagesoftware.com/latest/AboutMillMage/|Millmage]]
@@ Line 59: / Line 73: @@
 d/3d tekening omzetten naar 2d / 2.5d / 3d gcode : \\
-[[http://www.cambam.info/|cambam]] \\
+[[http://www.cambam.info/|cambam]]  & {{ :profiler:cambam_plus_1.0_settings.zip |CamBam presets }} - via Tools -> browse system folder \\
 [[https://carbide3d.com/carbidecreate/|carbidecreate]] \\
 [[https://mecsoft.com/freemill/|freemill]] \\
@@ Line 72: / Line 86: @@
 [[https://wiki.freecad.org/Path_Workbench|Path workbench in Freecad]] \\
 [[https://forums.maslowcnc.com/t/generating-gcode-with-inkscape-instead-of-cam-software/12058|Inkscape]] \\
-Jens heeft een introductiefilmpje gemaakt over de CNC i.c.m. FreeCAD. {{youtube>Ix1RpRocqSg?}} \\
 Grafische truukjes : \\
+{{ ::halftoner.zip |Halftoner Applicatie Windows}} \\
+{{ :reactor.zip |Reactor Applicatie Windows}} \\
 [[https://halftonepro.com/app#|Halftone]] \\
 [[https://rasterbator.net/| Rasterbator]] \\
 [[https://picsvg.com | plaatjes naar svg]] \\
+eventuele problemen met arcs en nauwkeurigheid:  \\
-problemen met arcs:  \\
 [[https://softsolder.com/2020/03/18/grbl-error-33-arc-coordinates-vs-decimal-places/|G2/G3 error 33 uitleg en oplossing ]]
 === GCode Simulator : ===
 http://camotics.org/
 === GCode Streamers : ===
@@ Line 93: / Line 104: @@
 Niet elke software voor grbl werkt ook met FluidNC, dit is testen of uitzoeken.
-[[https://resources.sienci.com/view/gs-installation/#download| GSender]]
+[[https://resources.sienci.com/view/gs-installation/#download| GSender]] \\
-[[https://github.com/winder/Universal-G-Code-Sender|Universal G-Code Sender (Java Cross-platform - ook voor mac!) ]]
+[[https://github.com/winder/Universal-G-Code-Sender|Universal G-Code Sender (Java Cross-platform - ook voor mac!) ]] \\
-[[https://github.com/vlachoudis/bCNC|bCNC ]]
+[[https://github.com/vlachoudis/bCNC|bCNC ]] \\
-[[https://github.com/Denvi/Candle|Candle ]]
+[[https://github.com/Denvi/Candle|Candle ]] \\
-[[http://www.cambam.co.uk/forum/index.php?topic=6482|CamBam+ met plugin ]]
+[[http://www.cambam.co.uk/forum/index.php?topic=6482|CamBam+ met plugin ]] \\
-van de makers van lightburn : [[https://docs.millmagesoftware.com/latest/AboutMillMage/|Millmage]]
+van de makers van lightburn : [[https://docs.millmagesoftware.com/latest/AboutMillMage/|Millmage]] \\
-====== Freesjes ======
+===== Macro's =====
+=== "Home All"  ===
+<code>
+$HZ ;$HX;G10 P0 L20 X0;$HY; G10 P0 L20 Y0;
+</code>
-^  ^ Type ^ diameter  ^ Lengte ^ snijlengte ^ Doel ^ Link voor als hij stuk gaat  ^
+=== "Probe Z" voor gebruik met de toolsetter v2 (kan nog beter?)===
-|{{:profiler:v-cutter.jpg?200|}}| 90 graden V-cutter | 6mm | 50mm| tip | Graveren / V-Carve | [[https://www.amazon.nl/gp/product/B07RZ4HS2J/ref=ppx_yo_dt_b_asin_title_o06_s00 | link]]|
+<code>
-|{{:profiler:1snijder.jpg?200|}}| Frees 1-snijder | 4mm | 45mm | 22mm| uitfrezen van objecten of pockets | [[https://www.amazon.nl/dp/B07RHH5B5V?ref=ppx_yo2ov_dt_b_product_details | link]]|
+G21			; metric units
-|{{:profiler:pcbfrees.jpg?200|}}| Frees 2-snijder | 0,6mm | ?mm | ?mm| Printplaten of fijn gaveerwerk | [[https://www.amazon.nl/dp/B09DCLQ5NL?ref=ppx_yo2ov_dt_b_product_details | link]]|
+G91                  	; Relative Positioning
+G38.2 Z-70 F100		; probe down with maximum 70mm and speed 100 mm/min
+G10 L20 P1 Z65		; set G54 Z to 65mm at contact
+G0 Z5			; retract 5mm
+G38.2 Z-10 F50		; probe down with maximum 10mm and speed 50 mm/min
+G10 L20 P1 Z65.3	; set G54 Z to 65mm at contact
+G0 Z5			; retract 5mm
+G90			; back to absolute
+</code>
+=== oude "Probe Z" voor gebruik met de toolsetter (voor als de nieuwe niet goed werkt)===
+<code>
+g90;g21;g38.2 z-70 f100;G92 z65;g1 z67;g38.2 z-10 f50;G92 z65;g0 z75;
+</code>
+=== "Ga naar positie x10 y10"===
+<code>
+G90 G21; (Absolute position in mm.)
+G0 X10 Y10;
+</code>
+Jens heeft een introductiefilmpje gemaakt over de CNC i.c.m. FreeCAD. {{youtube>Ix1RpRocqSg?}} \\
 ====== Electronica ======

User Tools

Site Tools

Differences

Page Tools